Cable specification::


To  access Homeit BOX on your STORM INTERFACE, it is necessary to have 7 conductors. We recommend the use of 8 x 0.22 alarm cable (10 filaments with 0.22 mm of diameter), with or without special coating.


Don't use mono-filament cables (per example a rigid UTP CAT. 5E). The characteristics of these cables are not appropriate for this connection. 



How to correspond each cable?


Please follow the guide on the left, in case you happen to have the same colours in your cable. If not, follow the numeric labeling. 


When connecting the cables, make sure that they are well stripped and making good contact with the connector. Also make sure that there is no electrical contact between adjacent cables and LED terminals.